What are the technical advantages of the automatic laminating machine

What are the technical advantages of the automatic laminating machine

What are the technical advantages of the automatic laminating machine

Apr 29,2022

The conventional automatic laminating machine technology on the market adopts the method of laminating with glue. Moreover, the automatic laminating method of the automatic laminating machine is different. The PE film with high pressure polyethylene as the main material is used. After the special treatment of the film is stopped, the PE film can be hot-melted and loaded on the color printing paper. After being processed by the automatic laminating machine, there will be no bubbles when rubbed hard, and it can withstand high temperatures from 20 to 120 degrees. , In the process of glue-free automatic lamination, a layer of auxiliary materials is placed between the heating roller and the PE film, and they pass through the automatic laminating machine together, and then peel off the fully automatic lamination product from the auxiliary materials. Due to the different materials used, the same PE film can make light film, matte or other effects. First of all, high-pressure polyethylene is blown to form the PE film as the main material, which is due to its easy-to-obtain hot melt and plasticity.​​
The advantages of fully automatic lamination technology are obvious
First, he does not use glue, the cost is reduced a lot, and the reduction is very obvious, especially the matte film and laser film, the cost is basically reduced by about 10%.
The second is that it is absolutely safe and environmentally friendly. In the past, those volatile harmful gases were very harmful to the human body during use. At the same time, through experiments, the product was put When lightly stirred, the film and the paper will be separated from the self-adhesive indentation machine, the film will float, the paper will sink, and it is easy to recycle, so it is a product with a high level of green.
Third, because the glue layer is 0.002-0.003mm after the glue is fully automatic laminating and gluing to the initial drying, the powder on the printed paper will appear to be uncompacted, resulting in the product showing uncompacted fineness. snowflake". However, no glue-free automatic lamination will not. Because the film used in this technology is 0.017-0.02mm thick, it becomes glue of this thickness in the hot melt state, so it only needs less than half of the pressure to make it casually. No "snowflakes" are produced, so no powdering is required.